Starkey Snap Fit Speaker/Receiver Wire

What Is It?

Single Snap Fit Receiver/Speaker wire

Available for each ear (red = right; blue = left)

Available in 5 lengths (1 = shortest; 5 = longest)

Available in 3 power levels (40dB = less gain; 60dB = most gain)

Compatible with RIC (receiver-in-the-canal) hearing aids from Starkey, such as Starkey 3 Series, Z series, Halo, Muse, Livio, Evolv AI.

Choose the ear, length, and power. If you do not know the length or power, please refer to your existing receiver – there will be the number printed at the housing of the receiver. Note: If you change the power level from your existing receiver, you may need to have your hearing aids reprogrammed by ASH Audiology or your local audiologist.

Please be aware Starkey receiver/speaker wires are also available in a newer Snap Fit 2.0 version (compatible with RIC hearing aids from Starkey, such as Genesis AI) and an older Original Fit version (compatible with RIC hearing aids from Starkey, such as Starkey X Series, Wi Series, and S Series). Unscrew the wire from the hearing aid and look at the joint between the wire and the hearing aid. For an Original Fit receiver, there will be 2 gold pins, for a Snap Fit receiver you will see 6 sockets, and for a Snap Fit 2.0 receiver you will see. If you need an Original Fit receiver, please contact ASH Audiology via phone, text, or email.